Clearwater Spas Genesis Blu Fusion Handmatig - Pagina 2
Blader online of download pdf Handmatig voor {categorie_naam} Clearwater Spas Genesis Blu Fusion. Clearwater Spas Genesis Blu Fusion 2 pagina's. Salt system
Pagina afdrukken
Salt Filtration
purify water without all the maintenance
Blu Fusion Instruction Manual
FOR SPAS WITH A CIRCULATION PUMP
Easy Start Up Directions
NOTE: Anytime you add a chemical,
turn the jets on to help dissolve it appropriately.
• The control of the Blu Fusion Top Side is identical to the Blu Fusion 1 controller. The userinterface is as follows:
• To activate the topside control, any of the push button keys must be held down for the entire Key Lockout deactivation sequence
which takes several seconds.
• If the Key Lockout has been activated and any push button key is pressed, the three digit Seven Segment Display will display "Loc".
• After one second, the three digit Seven Segment Display will display a "3" in the center digit.
• The push button key must be held down until the three digit Seven Segment Display decreases to "1" and the power setting is
displayed, then bromine output or boost can be adjusted.
• The displayed count will be displayed as quickly as in 0.75 second intervals. If the depressed push button key is not released
within five seconds after the power setting is displayed, the Key Lockout will be reactivated preventing an accidental increase or
decrease in bromine production ( this is a precautionary – safety feature of the Blu Fusion TS System).
• After the power setting is displayed, the push button keys are activated and power setting is enabled (normal error code display
is also resumed). If any key remains depressed for five seconds during the deactivated Key Lockout period, the Key Lockout will
reactivate and disable control features.
• The Key Lockout will reactivate in 20 seconds after the last operational release of a push button key. The three digit Seven Segment
Display will display "Loc" for 0.5 seconds when Key Lockout is reactivated.
• Upon reactivation of the Key Lockout, the Topside Control Seven Segment Display will display the power setting along with any
active error codes or power setting LED displays. If the Electrode Current display feature is enabled, the Key Lockout will not reactivate.
It may take a few hours up to a day to reach the desired level of Bromine (sanitizer).
The correct level of Bromine with the Genesis System should be between 0-1 on the
generic bromine test strip. The strips that test for the active bromine (sanitizer) level
are designed for generic bromine systems. Specifically for Genesis, if the bromine level
reads 2 or more (which reads ok on the test strip) then there is actually too much
pure bromine in your spa. For the Genesis system that produces a more "pure" sani-
tizer (without any "fillers" or extra chemicals), the "OK" range for the bromine will read
between 0-1 (light green) on a common bromine test strip.
Between 0-1 on the test strip is where you want your Bromine (sanitizer) level to re-
main. For continued water care, adjust the Genesis control dial as needed to remain in
the "true" ok range (0-1) and "balance" your water regularly. Continue to test the water
at least once weekly to monitor the water quality. If you do not use your spa for an extended period of time, set the Genesis control
dial back down to a setting of #3 or #2 (depending on the size of your spa) to have the spa continue sanitizing when you are not
home. For higher spa usage, occasional shocking may be required. Any time shock is used, the lid must remain open and people
should wait to use the spa for 1 hour.
*A: Periodically (every few months) check the Sodium Bromide (sanitizer) level by using the Genesis (or equivalent) test strip. The
reading on the test should be 1200-1800 parts per million. If the salt level is too high, in the window of the Genesis control panel
will flash and the system will not operate properly. If the salt level is too low it will not be able to produce bromine properly. Keep-
ing the sodium bromide in the correct level will ensure the Genesis system has the proper level to operate at its optimum
efficiency.
Suggestions: You may wish to use a high quality natural enzyme clarifier (SeaKlear or GLB is recommended) or a similar product to
help keep the filters clean and assist in controlling water line build up. If you have a pump that filters twice a day, or have any
further questions, please contact your salesperson for further instructions.
18800 Woodinville/Snohomish Rd. • P.O. Box 2140 • Woodinville, WA 98072 • p 425.483.1877 • f 425.487.1148 • www.clearwaterspas.com
cleaning out your spa plumbing 12-3-14.ind
Download this document at: clearwaterspas.com
LEGEND FOR ISIS CONTROLLER
"tdS" total dissolved solids
too high.
"OE" open element - detects
an inadequate connection.
"SE" shortened element
detects excessive current.
"bSt" boost key allows you to
boost the bromine.