ArtFox BEAM 7R Handmatig - Pagina 5

Blader online of download pdf Handmatig voor {categorie_naam} ArtFox BEAM 7R. ArtFox BEAM 7R 10 pagina's.

supplied along with computer light. Connection of XLR can refer to

the list below. Attention: every line should not touch each other or

touch plug. computer light can accept data control signal of DMX512

(1990) format. Control signal connect with panel which earmarked

"DIGITAL IN", then connect socket which earmarked "DIGITAL

THRU" with socket of next computer light which earmarked

"DIGITAL IN". After receive signal of DMX512, the status lamps

close to switch of address code will fulgurate. Or it will extinguish. If

it always in shine, it means DMX signal is false.

DMX512

PIN FUNCTION

1 GND

2 DATA-

3 DATA+

Suggest to use DMX signal terminal, it can avoid the breakage of

data control signal. Cause by electric noise. In simple terms, DMX

terminal is a XLR linker in which has a 120Ω resistance between

two-legged and three-legged plug. And the resistance should be

connected with "DIGITAL THRU" socket of the last computer light

of computer light chain. The connection can refer to table below.

The connection of DMX terminal connect a 120 Ω resistance

between two-legged and three-legged of XLR plug, and connect it to

DIGITAL THRU socket of the last computer light of computer light

chain.

5. Corrective maintenance

If lens of computer light be damaged or broken, please replace a

new one, and the same to modulator tube. If light turn dark, it means

service life of modulator tube is up, should be replaced in time. The

old modulator tube can explode. When computer light works out of

order, fuse in back panel should be checked. Notice: If it need replace,

using same spec fuse that earmarked in back panel. In the computer