Altron AL-761-N Gebruiksaanwijzing - Pagina 17
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Altron AL-761-N. Altron AL-761-N 19 pagina's.
Pagina afdrukken
TROUBLE SHOOTING Q & A:
● Simple to use
Indication sign
Does not power on
Displaying E-1
Displaying E-2
Displaying CLEA
Displaying E-3 or E-5
Displaying E-4
Alkaline water volume
went low
Both outlet waters went
low in flow volume
Main cause(s)
Loose AC plug connection.
Main power switch is off.
Fuse blown.
Either the tap water was turned off while
processing or the tap water pressure went
very low.
Clogged water inlet metal mesh screen
No electrolysis agent water or air was
mixed in the tube.
Over 2 hours operation
The operational life of the electrolysis
chamber has expired.
A buildup of minerals have taken place
in the alkaline water way.
Low tap water flow volume going into the
unit.
Clogged by dust on the metal mesh
screen, which is located between the
water in pipe and water inlet.
Clogged inside filter
17
Required action
Put on the AC plug correctly.
Turn the power switch on.
Have the cause determined.
Reset the error message pressing the
process ON/OFF switch and check
tap water valve or diverter lever
position
and
check
pathways.
Reset the error message pressing the
process ON/OFF switch and take off
clog from the metal mesh screen after
powering off the unit and detaching
the water inlet pipe.
Add the agent liquid to the tank, and
operate air-draining operation.
Manual cleaning operation required
Turn the power off and a few seconds
later, turn the unit on again. .
Contact your agent.
Manual cleaning required.
Open tap water valve more and
Power off and detach the water in
pipe after tap water closed. Take off
the clog from the metal mesh screen.
Contact your agent.
the
water