AKKTOL BT-607 Gebruikershandleiding - Pagina 12

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AKKTOL BT-607. AKKTOL BT-607 14 pagina's. Rivet nut tool

Instructions to Adjust The Stroke

1. Proper adjustment of the riveter is good for efficient and easy operation.

2. The adjustment of the riveter will vary, depending on the size and type of rivet nut being used

and the hole size.

3. Adjust the riveter by opening the handles outward as far as possible, loosening

the adjusting nut, and turning the outer sleeve outwards to increase the number of threads

on the mandrel protruding beyond the nosepiece for larger rivet nuts, and by turning

the outer sleeve inwards for smaller rivet nuts. Once the adjustment is set, tighten the adjusting nut.

4. Always ensure that the mandrel is threaded into all threads of the rivet nut to prevent

damage to the threads on the mandrel and/or the rivet nut.

5. If the handles are extended too far outward to provide enough leverage to pull the rivet nut,

turn the outer sleeve inwards to change the handle angle to provide the proper leverage.