dji AGRAS MG-1S Snelstarthandleiding - Pagina 7

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} dji AGRAS MG-1S. dji AGRAS MG-1S 20 pagina's. Spreading systems
Ook voor dji AGRAS MG-1S: Gebruiksaanwijzing (17 pagina's)

Pagina afdrukken

5. Insert the plugs on the left landing gear leg into the mounting holes on the spray tank.

6. Slide the fixing part on the right landing gear leg to the marks on the tube to align the screw holes on the fixing

part and the fin on the right side of the spray tank. Then tight the two M3×12 screws and one M3×10 (Plus)

screw.

7. Connect each of the two pump cables to the pump port on the aircraft body.

8. Connect the radar cable to the radar port on the aircraft body.

Unfolding the Frame Arms

1. Unfold the frame arms

2. Identify the position and rotational direction of the motors. The top view shows motors M1 to M8 arranged in a

counter-clockwise order, with motors M1 and M2 at the front of the aircraft, and motors M5 and M6 at the rear.

Motors M1, M3, M5 and M7 rotate counter-clockwise as indicated by the "CCW" mark, while motors M2, M4,

M6 and M8 rotate clockwise as indicated by the "CW" mark.

and tighten the two arm sleeves at each of the junctions

AGRAS MG-1S

M3×12

Quick Start Guide

M3×10 (Plus)

M3×12

Marks