Altronics Redback A 4395 Bedieningshandleiding - Pagina 7

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Altronics Redback A 4395. Altronics Redback A 4395 8 pagina's. 500 watt mixer amplifier

Pagina afdrukken
POWER SUPPLY
The amplifier operates on 230V AC or 24V DC primarily for battery backup operation. Ensure power is switched OFF at
the front panel before connecting either mains power to the IEC socket or 24V DC to the screw terminal input. As high
currents may be drawn when operating from a 24V DC supply confirm the capacity of the DC power supply used.
24V DC OUTPUT
A constant 24V output terminal has been provided to power ancilliary 24V devices. The output has a maximum current
draw of 1 amp. If more than 1 amp is drawn from the output, internal polyswitches will disconnect the output. These will
reset once the current draw is reduced.
24V BACKUP BATTERY CHARGING
The A 4395 amplifier includes a charging circuit so that a backup battery connected to the amplifiers 24V DC Input can
be trickle charged. The battery charger is connected to the battery internally when the link is fitted to the charging link
connector (see Fig 5 for more details). The battery will be charged at approximately 300mA.
CAUTION
!
RISK OF ELECTRIC SHOCK
OPEN BY QUALIFIED
PERSONNEL ONLY
230V AC @ 50Hz
(Fuse 10A M205)
Made in Australia by
Altronic Distributors Pty Ltd
www.altronics.com.au

DIP Switch settings

The A 4395 amplifier has a set of options which are enabled via the DIP switches 1-4. See Fig 6.
DIP 1 sets the input level sensitivity for input 1 (either the balanced 3 pin XLR or Dual RCA's).
DIP 2 enables the VOX muting. When the VOX is active input 1 will mute input 2.
DIP 3 enables the phantom power to the XLR connector on input 1.
DIP 4 sets the input level sensitivity for input 2.
www.altronics.com.au
Speakers tted with
100V line transformers.
DIP Switch Settings
+
SW
Item
1
Input 1 Sensitivity
100V
2
VOX Enable
3
Phantom Power Mic
4
Input 2 Sensitivity
+
24V DC
70V
OUT
(1A Max)
RESETTABLE
+
FUSE 20 AMP
FUSE 20 AMP
4
-16Ω
LINK THESE TERMINALS
TO CHARGE BACKUP BATTERY
DIP Switch Settings
SW
Item
1
Input 1 Sensitivity
2
VOX Enable
3
Phantom Power Mic
4
Input 2 Sensitivity
A 4395
A 4395 AMPLIFIER
On O
1V
0.1V
On O
On O
1V
0.1V
LINK TO
INPUT
CHARGE
24V DC
BACKUP
BATTERY
RESETTABLE
1 • Shield
2 • Hot
3 • Cold
+
-
Fig 5
On O
1V
0.1V
On O
On O
1V
0.1V
Fig 6
Redback® Proudly Made In Australia
500 Watt Power Amplifier
Input 1
Line
Balanced Mic
2
1
3
L
R
Input 2
DIP Switches
1
2
3
4
L
R
1 2 3 4
Balanced
2
1
3
Mic Wiring
Line
7