dji M100-ZENMUSE X5 Series Installatiehandleiding - Pagina 8
Blader online of download pdf Installatiehandleiding voor {categorie_naam} dji M100-ZENMUSE X5 Series. dji M100-ZENMUSE X5 Series 15 pagina's. Gimbal installation kit
Pagina afdrukken
DJI M100-ZENMUSE X5 Series Gimbal Installation Kit
3. Connect one end of the 10-pin and 8-pin gimbal cables to the Flight Controller.
4. Arrange the other ends of the gimbal cables near the nose of the aircraft.
Aircraft Nose
5. Hold the new upper plate with the notch facing the left of the aircraft (with its tail facing you). Pull
the Flight Controller's CAN cable, signal cable and power cable through the front wire outlet, and
then pull the Aircraft Status Indicator cable through the back wire outlet.
Flight Controller Power Cable (4-pin)
CAN Cable (5-pin)
8
©
2016 DJI. All Rights Reserved.
Aircraft Status Indicator
Flight Controller
10-pin Port
8-pin Port
Flight Controller Signal Cable (6-pin)
Aircraft Status Indicator
Cable (6-pin)