dji MATRICE 300 RTK Onderhoudshandleiding - Pagina 6
Blader online of download pdf Onderhoudshandleiding voor {categorie_naam} dji MATRICE 300 RTK. dji MATRICE 300 RTK 19 pagina's. Dual gimbal connector
Ook voor dji MATRICE 300 RTK: Productinformatie (17 pagina's), Onderhoudshandleiding (19 pagina's), Gebruikershandleiding (15 pagina's), Snelstarthandleiding (10 pagina's), Productinformatie (10 pagina's)
Pagina afdrukken
MATRICE 300 RTK Maintenance Manual
1. All the SDR, GPS/RTK antennas on the aircraft and remote controller are
Antennas
tightened firmly and free of damage. They are in a place that will give the
propellers proper clearance.
Gimbal
1. The gimbal appears intact and can rotate smoothly in all the three axes.
(Payload)
2. The lens is clean.
Other Payload
1. There is no blockage. The shell of the payload has no damage. The mounting
(If applicable
bracket is secure and in good condition.
or available)
1. The control sticks are centered in neutral position, with no foreign object such as
Remote
sand and soil, and can smoothly reach full ranges of motion in all channels.
Controller
2. The screen on the remote controller is clean and dry.
1. The dampeners are not damaged. The damping plate has no crack or split. The
Damping Plate
gimbal connector is secure and cannot be rotated in the opposite direction after
the gimbal is installed.
1. There is no blockage in the working range of the Infrared Sensing and Vision
Systems and auxiliary lights, especially when using a non-DJI payload or
accessory.
2. Check the lenses or glass of the Infrared Sensing and Vision Systems and
Infrared
auxiliary lights.
Sensing and
a. Make sure there are no stickers or any other obstructions over the Infrared
Vision
Systems
b. Clean the lenses and glass with a dust-free cloth if there is any moisture,
c. Contact DJI Support if there is any damage to the lenses of the Infrared
1. Spare USB-C cables
2. Two pairs of spare landing gears
3. Two pairs each of spare CW and CCW propellers
Emergency
4. Spare microSD cards
Supplies
5. Screwdrivers, screws of all types used, cable ties, tape, a dry and soft cloth
6. A multimeter
7. A case to store emergency supplies
Checklist When Powered On
Type
Essentials
1. Confirm the control stick mode (Mode 1/2/3), and check in the control stick
calibration page in the app if the proportion of the control lever is correct.
Remote
2. The remote controller has sufficient power and the battery is firmly installed.
Controller
3. Confirm that the channel used is automatic or custom, and then choose the
operation frequency and channel according to the signal to noise ratio.
6
©
2020 DJI All Rights Reserved.
Sensing and Vision Systems.
fingerprint, or dirt.
Sensing and Vision Systems.