dji Inspire 1 Snelstarthandleiding - Pagina 9

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} dji Inspire 1. dji Inspire 1 10 pagina's.
Ook voor dji Inspire 1: Snelstarthandleiding (11 pagina's), Gebruikershandleiding (20 pagina's)

Pagina afdrukken

10. Flight

Safe to Fly (GPS)

In the DJI GO App:

Auto Takeoff

The aircraft will take off and hover at

an altitude of 4 feet (1.2 meters).

Return-to-Home

Brings the aircraft back to the Home

Point. Tap again to stop the procedure.

Manual Takeoff

Combination Stick Command

to start/stop the motors

Return-to-Home (RC)

Same as the RTH button in the DJI GO app.

Brings the aircraft back to the Home Point.

Press and hold to initiate the RTH procedure.

Press again to cancel.

Rotating propellers can be dangerous. DO NOT start the motors in narrow spaces or when there are people nearby.

●

Never perform the Combination Stick Command in mid-flight, or else the aircraft will crash.

●

Always keep your hands on the remote controller so long as the motor is still spinning.

●

After landing, power off the aircraft before turning off the remote controller.

●

Take off from a flat surface in a wide open space, with the rear of the aircraft facing towards you.

●

Appendix

Aircraft Status Indicator

slowly . . . Safe to fly (GPS working).

. . . No GPS but VPS working.

slowly . . . P-ATTI or ATTI mode.

quickly ..... Not connected to remote controller.

slowly . . . Low battery level warning.

quickly ..... Critical low battery level warning.

solid —— Critical error.

. . . compass calibration required.

Learn more information from:

www.dji.com/product/inspire-1

Before taking off, ensure the Aircraft Status Bar in the DJI GO app

indicates 'Safe to Fly (GPS)'.

Remote Controller Status Indicator

RC normal but not connected to aircraft.

RC normal and connected to aircraft.

RC Slave Mode and not connected to aircraft.

RC Slave Mode and connected to aircraft.

( B ... ) Low battery warning / RC error.

( B—B— ... ) RC idle for 5 minutes.

Auto Landing

The aircraft will land vertically and stop its

motors.

The aircraft will not avoid obstacles while it is returning to the

●

Home Point, and an appropriate RTH altitude must be set before

takeoff. You should also use the control sticks to guide the aircraft.

Refer to the Safety Guidelines and Disclaimer for more details.

Manual Landing

Ensure the landing gear is lowered

before landing.

Left stick up (slowly)

to take off

If you want to lower the landing gear

but the switch is already in the

'down' position, toggle the switch

up and down again.

Raise

Lower

Left stick down (slowly)

until you touch the ground.

Hold a few seconds to

stop the motors.

Downloading Your Videos

●

Compressed video and photo files

are automatically stored on your

mobile device while you are

recording. You can view them in the

Library section of the DJI GO app.

●

For the best quality, download the

original HD files through the app or

using an SD card reader.

※ This content is subject to

change without prior notice.