dji INSPIRE 2 Disclaimer en veiligheidsvoorschriften - Pagina 10
Blader online of download pdf Disclaimer en veiligheidsvoorschriften voor {categorie_naam} dji INSPIRE 2. dji INSPIRE 2 20 pagina's. Focus handwheelremote controller stand
Ook voor dji INSPIRE 2: Snelstarthandleiding (18 pagina's), Gebruikershandleiding (14 pagina's), Handleiding voor onderhoud en reparatie (6 pagina's), Veiligheidsvoorschriften (4 pagina's), Handmatig (2 pagina's), Gebruikershandleiding (5 pagina's), Snelstarthandleiding (9 pagina's)
Pagina afdrukken
Flight Modes, Functions and Warnings
Flight Modes
To avoid serious injury and property damage, observe the
following rule:
DO NOT switch from P-mode to either A-mode or S-mode unless
you are sufficiently familiar with the aircraft's behavior for each
flight mode, since disabling GPS may result in being unable to
land the aircraft safely.
P-mode or S-mode is preferred for most flight scenarios. Users can
switch to A-mode if P-mode or S-mode is unavailable. When flying in
A-mode, take EXTRA precautions because some features are NOT
available in A-mode. When flying indoors, the aircraft cannot perform
precision hovering when flying above the surfaces that do not have
a clear pattern. Refer to the "Vision System and Infrared Sensing
System" section for complete indoor flying criteria.
1. P-mode (Positioning): P-mode works best when the GPS signal
is strong. The aircraft utilizes the GPS and Vision System to
automatically stabilize itself, navigate between obstacles or
track a moving object. Advanced features such as TapFly and
ActiveTrack are enabled in this mode.
2. S-mode (Sports): S-mode is identical to P-mode in terms of flight
controller settings, except that the handling gain values of the aircraft
are adjusted in order to enhance the maneuverability of the aircraft.
The maximum flight speed of the aircraft is increased in this mode.
3. A-mode (Attitude): When neither the GPS nor the Vision System is
available, the aircraft will only use its barometer for positioning to
control the altitude.
If you intend to switch to modes that disable GPS assistance (e.g., A
mode), you are required to accept the prompted disclaimer to enable
this function. If this function is enabled, you further understand and
agree that data including but not limited to flight telemetry data and
function records could be uploaded to and maintained on a DJI
designated server.
Failsafe and Return to Home
1. The Return to Home feature will NOT work if the GPS signal is
insufficient or if GPS is not active.
2. Press the RTH (Return to Home) Button on the remote controller to
bring the aircraft back to the Home Point instead of turning off the
remote controller.
3. Tall buildings may adversely affect the Failsafe function. Please
adjust the aircraft location, altitude and speed while returning
home to avoid obstacles.
4. Make sure to always fly the aircraft within the transmission range
of the remote controller.
5. Only use the Failsafe and Return to Home functions in case
of emergency, as they may be affected by the weather, the
environment, or any nearby magnetic fields.
6. The aircraft cannot avoid obstacles during the Failsafe RTH when
lighting condition is not ideal. Therefore, it is important to set an
appropriate Failsafe altitude before each flight.
7. If the battery life so allows, the aircraft may first return to the last
position where it had connection with the remote controller during
the Failsafe RTH. As a result, you may observe the aircraft first
flying away from you, then returning to the home point.
Low Battery
1. When the Critical Battery Level Warning activates and the
aircraft is descending automatically, you may push the throttle
up to maintain the aircraft's altitude and navigate it to a more
appropriate location for landing.
©
8
2016 DJI All Rights Reserved.
2. When battery warnings are triggered, promptly bring the aircraft
back to the Home Point or land to avoid losing power during flight
and causing damage to the aircraft, property, animals, and people.
Transformation Function
To reduce the risk of pinching, observe the following rules:
1. Stay away from the aircraft when it is transforming to prevent
injury.
2. DO NOT attempt to catch or hold the aircraft, as the landing gear
will be lowered if the Vision Position System detects an object and
may cause injury.
1. Ensure the landing gear is lowered before landing.
2. Keep the aircraft arms clean, otherwise transformation may be
affected.
3. Never apply lubricants to aircraft arms.
Vision System and Infrared Sensing System
1. The Vision System cannot work properly over surfaces that do
NOT have clear pattern variations. The Vision System is only
effective when the aircraft is at altitudes of 0.3 to 10 meters.
2. The Vision System may NOT function properly when the aircraft is
flying over water.
3. Keep your pets away from the aircraft when the Vision System is
activated, as the sonar sensors emit a high frequency sound that
is only audible to some pets.
4. Note that the Vision System may NOT function properly when the
aircraft is flying too fast or too low.
5. Operate the aircraft cautiously when in any of the following situations:
a. Flying over monochrome surfaces (e.g., pure black, pure white,
pure red, pure green).
b. Flying over highly reflective surfaces.
c. Flying at high speeds (over 8m/s at 2 meters or over 4m/s at 1
meter).
d. Flying over water or transparent surfaces.
e. Flying over moving surfaces or objects.
f. Flying in an area where the lighting changes frequently or
drastically.
g. Flying over extremely dark (< 15 lux) or bright (> 10,000 lux)
surfaces.
h. Flying over surfaces that can absorb sound waves (e.g., thick
carpet).
i. Flying over surfaces without clear patterns or texture.
j. Flying over surfaces with identical repeating patterns or
textures (e.g. tiles with same design).
k. Flying over inclined surfaces that will deflect sound waves
away from the aircraft.
l . Tiny obstacles (with less infrared reflection energy).
6. In the event of loss of the remote controller's signal, the aircraft
will hover for 8 seconds and then auto-land if it is in "P" mode.
7. Vision System calibration is required if the aircraft suffers from crashing.
Calibrate the Vision System if the DJI GO 4 app prompts you to do so.
8. Please be mindful of blind spots of the Vision System and Infrared
Sensing System.
9. Do not use other ultrasonic devices with frequency of 40 KHz
when Vision System is in operation. Keep the sensors clean and
at all times. DO NOT temper with the sensors.
10. The Vision System and Infrared Sensing System are not able to
brake and stop the aircraft at a safe distance from an obstacle if
the aircraft speed exceeds 14m/s (31.3 mph).
TapFly
TM
To prevent serious injury or property damage, observe the following
guidelines: