ARTHUR HOLM AHDTL Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} ARTHUR HOLM AHDTL. ARTHUR HOLM AHDTL 13 pagina's. Universal motorized system for gooseneck microphones
Ook voor ARTHUR HOLM AHDTL: Gebruikershandleiding (20 pagina's)

Pagina afdrukken

SAFETY INSTRUCTIONS

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy, and if not installed and used

in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected

• Consult the dealer or an experienced AV technician for help

APPLICATIONS

DynamicTalk is an elegant retractable system for gooseneck

microphones with exclusive features. It not only makes the microphone

disappear within the desk surface but it also provides a pleasant light

to indicate its status. Thanks to its protective and patented lighting

ring, the microphones can be safely stored and protected making

meeting and conference spaces more flexible and versatile.

DynamicTalk

provides

two

different

Conference. When in PA mode, a push button placed on the stainless

steel cover plate allows to activate or de-activate the microphone,

and the LED ring will indicate the status by changing colour from red

to green. The system will automatically silence the microphone when

working

modes:

and

APPLICATIONS

retracting. When in Conference model, the microphone will always be

active and both the light ring and the access to the push button on

the cover plate will be available via GPI and GPO for remote control.

DynamicTalk is available in 3 sizes:

microphones. The system can be adjusted to the exact length of the

microphone via AHnet and AHlink. The AHlink is an excellent tool to

diagnose, verify and configure DynamicTalk.

Features

• Universal lift system for gooseneck XLR 3 pin microphones

• Stainless steel cover plate with 3 buttons

• LED lighting ring to indicate microphone status, 360º

• Serial control and remote diagnosis

• Individual addressing

• AH-AMMC Auto Mechanical Movement Calibration

• PA and Conference working modes

Box Contents

Before the installation of your DynamicTalk, please check the contents

of the shipping box, it must contain the following items:

• DynamicTalk

• Power cord

• Power supply 100-240Vac, 50-60Hz. Output 12V

• User Manual

Important Note: This device can only work with the power supply

included in the shipping box. This power supply can not be replaced by

any other rather than the original one.

Caution! Never use this monitor in horizontal position.

for 400 mm, 500 mm and 600