1 Sound LCC44 Installatiehandleiding - Pagina 7

Blader online of download pdf Installatiehandleiding voor {categorie_naam} 1 Sound LCC44. 1 Sound LCC44 16 pagina's.

Installing the bracket on the LCC44/LCC84 enclosure

Once the bracket has been separated from the wall-mount plate, it can

be easily attached to the LCC44 or LCC84 enclosure.

Important: For permanent or semi-permanent installation,

the use of medium-strength threadlocking compound is

recommended on all user-installed screws.

Figure 9. The rear panels of the LCC44 (left) and

LCC84 with the mounting points for the bracket

indicated.

| 3 - INSTALLING LCC44/LCC84 ON A WALL MOUNT BRACKET

Figure 10. Removing the M8 x 20 mm screws for the

installation of the bracket (LCC44 shown).

• Lay the enclosure on its front grille, taking whatever necessary

precautions to avoid damaging the finish of the cabinet or the

grille. Although the LCC44 and LCC84 units have a symmetrical

vertical coverage and there is no "top" or "bottom" acoustically,

if the front grille is equipped with a logo plate you should note

its orientation and for aesthetic reasons, and make sure that

the bottom of the logo plate will be towards the bottom of the

enclosure when it is installed.

• Using a 5 mm hex wrench, remove the two button-head M8 x

20 mm screws from the two connection panels, between each

pair of SpeakOn connectors on the rear of the enclosure. Keep

them, as they will be used to mount the bracket.