3idee le-idc3 Montage-instructies - Pagina 4

Blader online of download pdf Montage-instructies voor {categorie_naam} 3idee le-idc3. 3idee le-idc3 4 pagina's. Vesa adapter
Ook voor 3idee le-idc3: Montagehandleiding (8 pagina's)

Pagina afdrukken

Safety instructions

General notes

Make sure that all screws are tight and that the monitor audibly clicks into place during installation (if

present).

The material of the adapter is not heat resistant. Avoid direct heat around the adapter such as PC

exhaust or direct sunlight in summer.

PLA is UV resistant but not suitable for high temperatures.

Avoid jerky movements (pulling, tearing) on the PC monitor. This can affect the performance of the

VESA adapter.

Do not subject the PC monitor to excessive loads such as leaning or pushing. This can impair the

performance of the VESA adapter.

Material Notes

The adapter is made of high-quality polylactide (PLA) plastic. PLA is both a colorfast and UV-resistant

material and has low flammability. Polylactide has a low temperature resistance of approx. 35°C- 40°C

and is therefore not suitable for use in the vicinity of direct heat and heat sources.

Important note: Due to the low temperature resistance, the adapter is not suitable for use in vehicles

such as mobile homes or caravans. The temperatures prevailing there could affect the material and

impair the functionality of the adapter.

We wish you a lot of fun with your product.

Your 3idee Team

Responsible for this content:

3idee Technologies S.à r.l

5, ZA Um Lenster Bierg

L-6125 Junglinster

Luxembourg

Assembly

instructions