dji Phantom FC40 Aan de slag handleiding - Pagina 2

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} dji Phantom FC40. dji Phantom FC40 11 pagina's.

DJI Phantom 1 & FC40 setup – Getting Started Guide

RTH – Return to Home – Failsafe programming of the Naza

ATTI – Altitude hold mode on the NAZA F/C – this does away with the use of the GPS and

gives you semi-manual control.

Assemble Quadcopter and Install Camera on FC40

Insert microSD card. Download the DJI app, turn on and connect to camera. Note – the plain

Phantom 1 does not come with a camera, so this step should be ignored for that model.

Charge the camera using the microUSB connector on it.

Here is a basic assembly video:

The propeller guards are a highly recommended accessory – especially for those without a lot

of Phantom experience.

NOTE: The FC40 will work and ﬂy ﬁne without the camera attached or turned on. Newbies

may want to start this way to avoid crashes which could damage the cam.

(for safety, do this with the propellers removed – see picture below)