Akku Vision e-bike vision EBV E-BIKE BATTERY Handleiding/veiligheidsaanwijzingen - Pagina 7
Blader online of download pdf Handleiding/veiligheidsaanwijzingen voor {categorie_naam} Akku Vision e-bike vision EBV E-BIKE BATTERY. Akku Vision e-bike vision EBV E-BIKE BATTERY 9 pagina's.
Pagina afdrukkenThe Charging
ATTENTION: The EBV E-Bike Battery, compatible to the Panasonic 36V drive system must only be charged with
the E-Bike Vision charger!
The charging outside the pedelec is started by unlocking the lock, that way you can remove the battery as usual and
charge it in your appartement or garage in your presence.
Turn off the drive system and wait until the LEDs of the battery expire. Only now, you unlock the lock with the key
counter-clockwise to the left.
When using the E-Bike Vision charger you are able to charge your battery in or outside the battery.
The drive system must be turned off.
Simply open the cap.
Under the cap, the 3pin connector for the E-Bike Vision charger is located.
Start of charging process with E-Bike Vision charger
1. Connect the charger to the mains.
2. Make sure that none of the battery LEDs are lighting when it's not mounted in the eBike.
3. Now plug in the charging connector of the charger to the battery.
4. In the charging socket of the battery and in the charging plug of the charger, there are guide slots to prevent
the charging plug to be inserted incorrectly. Please turn the charging plug slightly, when you plug it in the
socket of the battery, until it is in its right position. This manifests itself by a slight snap. Now, the charging
plug can be inserted with light pressure. Please do not try to push the charging plug into the charging socket
with too much force, otherwise you could damage the battery or the charger.
5. Charging process starts. The LEDs of the battery corresponding to its current state of charge begins to flash.
If you try to start charging with more than 80 % charged capacity (min. 4 LEDs of battery's charge indication
are lighting), it might happen that the Battery-Management-System will prevent charging to protect the cells.
In this case the charger will end up.
Use the battery as usually and charge it afterwards.
During charging, the capacity is indicated by lighting and flashing of the battery's LEDs as follows:
LED 1 flashing:
LED 1 lighting and LED 2 flashing:
LED 1,2 lighting and LED 3 flashing:
LED 1,2,3 lighting and LED 4 flashing:
LED 1,2,3,4 lighting and LED 5 flashing:
LED 1,2,3,4 and 5 lighting:
Break up of charging process
To complete the charging, unplug the charging plug of the battery. Reattach the cap of the charging socket and pull
the power plug of the charger from the wall socket.
With the E-Bike Vision fast charger, charging is completed, as soon as all LEDs of the battery are.
Charging time
EBV E-Bike Battery
Compatible with
Panasonic* 36 V Deluxe
Date October 2021
Version 06
0 – 10 % charged capacity
11 – 40 % charged capacity
41 – 60 % charged capacity
61 – 80 % charged capacity
81 – 99 % charged capacity
>= 99 % charged capacity
Capacity
6 A fast charger
13 Ah
17 Ah
Akku Vision - Manual EBV E-Bike Battery compatible to Panasonic 36 V
*Panasonic is a trademark
4 A charger
~ 2.7 h
~ 3.75 h
~ 3.3 h
~ 4.75 h
2 A car charger
~ 7 h
~ 9 h
S. 7 / 9