dji OK100 Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} dji OK100. dji OK100 18 pagina's.

Using DJI OM 4

After powering on, DJI OM 4 will enter follow mode by default. The gimbal converts joystick

movements into smooth pan and tilt transitions, and reduces the impact of natural vibrations.

The mobile phone can by adjusted by hand as well.

M Button

When Powered Off

Press once: check battery level.

Press and hold until it beeps once: power on.

When Powered On

Press once: switch between photo and video mode (this is the default setting

and can be changed in DJI Mimo.)

Press twice: switch between landscape and portrait mode.

Press and hold until it beeps once: enter or exit standby mode.

Press and hold until it beeps twice: power off.

Shutter/Record Button

Press once to take a photo or start or stop recording. Press and hold for burst

shooting when in photo mode.

Battery Level Indicators

Indicates the battery level of DJI OM 4.

System Status Indicator

Indicates the current status.

Blinking Pattern

Solid yellow

Solid green

Pulses yellow or green Standby mode

Blinks red and green

alternatively

Solid red

Joystick

Move vertically to tilt the mobile phone. Move horizontally to pan the mobile

phone. The joystick control direction can be set in DJI Mimo.

Descriptions

Bluetooth disconnected

Bluetooth connected

Firmware updating/firmware update failed

Gimbal abnormality (such as temperature is too low

or high or battery is over discharged)