dji RONIN 2 Gebruikershandleiding - Pagina 2

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} dji RONIN 2. dji RONIN 2 6 pagina's. Counterweight set
Ook voor dji RONIN 2: Snelstarthandleiding (19 pagina's), Gebruikershandleiding (4 pagina's), Gebruikershandleiding (5 pagina's), Handmatig (4 pagina's), Gebruikershandleiding (6 pagina's)

Disclaimer and Warning

Congratulations on purchasing your new DJI OSMO

affects your safety and your legal rights and responsibilities. Read this entire document carefully

to ensure proper configuration before use. Failure to read and follow instructions and warnings

in this document may result in serious injury to yourself or others, damage to your DJI OSMO

product, or damage to other objects in the vicinity. This document and all other collateral

documents are subject to change at the sole discretion of DJI OSMO.

By using this product, you hereby signify that you have read this disclaimer and warning carefully and

that you understand and agree to abide by the terms and conditions herein. You agree that you are

solely responsible for your own conduct while using this product, and for any consequences thereof.

You agree to use this product only for purposes that are proper and in accordance with all applicable

laws, rules, and regulations, and all terms, precautions, practices, policies and guidelines DJI OSMO

has made and may make available.

DJI OSMO accepts no liability for damage, injury or any legal responsibility incurred directly or

indirectly from the use of this product. The user shall observe safe and lawful practices including,

but not limited to, those set forth in this document.

Notwithstanding above, your statutory rights under applicable national legislation are not affected

by this disclaimer.

OSMO is a trademark of SZ DJI OSMO TECHNOLOGY CO., LTD. (abbreviated as "DJI OSMO") and

its affiliated companies. Names of products, brands, etc., appearing in this document are trademarks

or registered trademarks of their respective owner companies. This product and document are

reproduced in any form without prior written consent of or authorization from DJI OSMO.

Introduction

The RONIN

2 Classic Handlebar allows the Ronin 2 to be carried using two side handles and

can also be used for mounting accessories.

In the Box

Handlebar ×1

Top Mounting Block ×1

Usage

The Ronin 2 should be mounted on the middle octagonal section of the handlebar, while

accessories should be installed on the cylindrical sections. The procedure for mounting the Ronin

2 is described below. For the procedure for mounting accessories, please refer to the specific

documentation for each accessory.

1. Mount the two side handles to the two ends of the handlebar. Use the tick marks on the handlebar

to ensure that the handles are in the desired positions, then tighten the knobs. The four-hand stops

on the handles help users hold the handles firmly but can be detached if not required.

Side Handle ×2

Screw Pack ×1

product. The information in this document

Gimbal Dovetail Mount ×1