1 Sound Tower Series Installatiehandleiding - Pagina 8

Blader online of download pdf Installatiehandleiding voor {categorie_naam} 1 Sound Tower Series. 1 Sound Tower Series 16 pagina's.

TOWER SYSTEM LCC44/LCC84 WALL INSTALLATION

Figure 11. Positioning the bracket and aligning the

mounting holes.

• Place the bracket over the rear of the enclosure, aligning the

two mounting holes in the bracket with the threaded holes in

the connection panels. Be sure to orient the bracket with the

attachment for the wall-mount plate towards the end of the

enclosure that will be on the bottom when it is installed.

Figure 12. Inserting the lower screw through the

bracket.

• Insert one of the M8 x 20 mm screws previously removed, and

thread it into the bottom (toward floor) panel of the enclosure

through the mounting hole in the bracket.

Figure 13. Inserting the upper screw through the

bracket.

• The upper end of the bracket can be secured using the second

M8 x 20 mm screw previously removed. Insert the screw and

thread it into the top (toward ceiling) panel of the enclosure

through the upper mounting hole in the bracket.

Figure 14. Tightening the screws to fix the

mounting bracket (LCC44 shown).

• Using a 5 mm hex wrench (Allen type) with a length that allows

for sufficient leverage, firmly tighten the screws into the panels,

making sure that their can be no movement between the bracket

and the speaker enclosure.