dji datalink 3 Snelstarthandleiding - Pagina 5

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} dji datalink 3. dji datalink 3 9 pagina's.

2. Battery Level and Charging

Press the power button once to check the battery level. Press and hold for 2 seconds to power on

the remote controller.

Low to High

Please use the included charger to charge the remote controller, when the power level is low. It is

recommended to charge the remote controller with the power off. Please recharge the battery at

least every three months to ensure it remains in a fully charged state – the battery will deplete when

stored for long periods.

It takes about 4 hours to fully charge the remote controller.

3. Linking

Example: DJI N3 Flight Controller.

a. Insert the antennas into the ports on the side of the air system and snap into place.

b. Connect the DBUS/SBUS port on the air system with the RF port on the DJI flight controller series

using the provided DBUS cable.

c. Power on the remote controller and press the C1, C2 and D buttons simultaneously. The Status

LED will blink blue and make a warning sound, indicating that linking has started.

d. Press the Linking Button on air system. Status LEDs on both the remote controller and the air

system will be solid green when linking is complete.

4. Preparing Your Remote Controller