Akku Vision E-BIKE VISION Handleiding/veiligheidsaanwijzingen - Pagina 5

Blader online of download pdf Handleiding/veiligheidsaanwijzingen voor {categorie_naam} Akku Vision E-BIKE VISION. Akku Vision E-BIKE VISION 6 pagina's.

Pagina afdrukken

Operation

1. Before first use please check the parameters of the charger and your battery according the rating label or

the provided documentation to ensure the accordance.

2. Check if that the local main AC voltage level is suitable for the charger. InputVoltage: DC 11-16V, 50-60Hz

InputCurrent: max. 6 A

3. Plug in the mains cable into an DC mains socket.

4. Now connect the DC cable to the battery pack.

Completion of the charging

1. If the battery is fully charged, the charger stopps.

LED function

LED flashes green, approx. 1 time per second:

LED flashes green, approx. 2 times per second:

LED lights up green continuously:

LED flashes red, approx. 1 time per second:

Notes

This charger has a wrong polarity protection. The right polarity is the base that the charger generates a charge

voltage. Depending on the battery safety board, a battery pack that is discharged under it's nominal discharge

voltage can't be charged again. In this case please contact Akku Vision GmbH.

Error through short circuit or wrong polarity will be reset automatically maximum 1min after removing the Problem.

The device has a temperature controll unit which will protect it against overheating and continuous overload. In this

case, the ouput will reduced until a stable operating temperature is realized.

Disposal

Electrical equipment marked with the cancelled waste bin symbol must not be discarded in the standard household

waste; instead it must be taken to a suitable specialist disposal system.

In the countries of the EU (European Union) electrical equipment must not be discarded via the

normal domestic refuse system (WEEE - Waste of Electrical and Electronic Equipment, directive

2012/19/EU). You can take unwanted equipment to your nearest local authority waste collection point

or recycling centre.

There the equipment will be disposed off correctly and at no cost to you. By returning your unwanted equipment

you can make an important contribution to the protection of the environment.

Date 2022-04-29

Index 02

Stand by

charging process

charging process completed

Battery voltage too high or charging timer expired

Akku Vision - Manual 2 A Car charger for EBV E-Bike Battery 36 V

S. 5 / 6