dji ZENMUSE XT S Gebruikershandleiding - Pagina 13

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} dji ZENMUSE XT S. dji ZENMUSE XT S 15 pagina's.

1. Left Dial

Turn to adjust the gimbal's tilt.

2. Record Button

Press to start/stop recording video.

3. Shutter Button

Press to take a photo, you can set the photo mode as single or interval in the DJI Pilot App.

Taking single photo is supported during video recording.

4. Right Dial

Turn to adjust the gimbal's pan.

5. Camera Setting Dial*

Turn to select palette or adjust zoom. The dial selects palette by default, press the button inside

the dial to switch between palette and zoom adjustment.

* Only supported by Matrice 200 series V2 aircraft.

Updating Firmware

Ensure that the Zenmuse XT S is securely mounted onto the aircraft and the aircraft is powered off.

Ensure that there is enough free space on your microSD card and the Intelligent Flight Batteries are

fully charged.

1. Visit DJI official website and go to Zenmuse XT S download page.

2. Select the latest firmware to download.

3. Copy the downloaded firmware update file to the root directory of the microSD card.

4. Insert the microSD card into the microSD card slot of Zenmuse XT S.

5. Power on the aircraft, the gimbal and camera will start to perform an auto-check, then it will start

to update automatically and the buzzer will beep to indicate the status.

6. Restart the device after the firmware update is completed.

Alarm

4 short beeps

1 long beep

1 long beep followed by 2 short beeps

Continuous long beep

Ensure that there is only one firmware update file on your microSD card.

Do not power off the aircraft or detach the Zenmuse XT S during updating the firmware.

Description

An update file is detected, preparing for update.

Updating firmware, do not stop the update.

The firmware update was successful.

The firmware update failed, please try to update again.

Contact DJI support for help if needed.

ZENMUSE XT S User Manual