djpower djv DC-2 CO2 CONFETTI FALL Gebruikershandleiding - Pagina 3
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} djpower djv DC-2 CO2 CONFETTI FALL. djpower djv DC-2 CO2 CONFETTI FALL 10 pagina's. Pro stage effects
Pagina afdrukken1.5.1
CO2
The machine uses CO2 gas or liquid CO2 as input. The application of CO2 involves serious risks. Make
sure that you are well informed on these risks before installation and/or operation. Always use approved
CO2 cylinders, hoses and connections. Always consult your CO2 supplier for regulations and instructions
on safe installation and use.
DJPOWER is not liable for unsafe situations, accidents and damage that are the result of incorrect working
with CO2 gas and CO2 cylinders.
Inadequate installation and/or operation of a CO2 powered machine and CO2 cylinders can
lead to death or serious injury. Always follow the instructions from this manual, from your
CO2 supplier and from local authorities.
1.5.2
Indoor Use
The machine is designed for outdoor use and use in well-ventilated indoor spaces. When used indoors,
make sure you take the necessary preparations. These preparations could include, but are not limited to:
•
Consulting your CO2 supplier.
•
Calculating the reduction of oxygen for the indoor space.
•
Checking the location for spots where CO2 could accumulate and taking preventive actions.
•
Installing CO2 monitoring devices that will warn for hazardous CO2 levels.
Do not use the machine in poor ventilated confined spaces. Exposure to high levels of CO2
gas can cause symptoms like headache, nausea, loss of consciousness or even death.
1.5.3
Personal Safety
•
Always connect the product to a grounded circuit to avoid the risk of electrocution.
•
Do not use the machine if there are people or animals in the direct output.
•
Make sure that children, unauthorised people and animals do not obtain access to the machine.
1.5.4
Mounting and Rigging
•
For safety reasons, we recommend to operate the product while it is mounted on the truss.
•
CAUTION: When transferring product from extreme temperature environments, (e.g. cold truck to
warm humid ballroom) condensation may form on the internal electronics of the product. To avoid
causing a failure, allow product to fully acclimate to the surrounding environment before connecting
it to power.
•
Do not mount the product on a flammable surface (linoleum, carpet, wood, paper, carton, plastic,
etc.).
•
Do not use in a confined space. Always install the product in a location with adequate ventilation.
•
Make sure there are no freestanding objects or objects that can be damaged by the machine within
the output distance. Keep clear 10-15 m (32.8-49.2 ft) from the output.
1.5.5
Power and Wiring
•
Always make sure that the voltage of the outlet to which you are connecting the product is within the
range stated on the decal or rear panel of the product.
•
Make sure the power cord is not crimped or damaged.
- 2 -