djpower V-4 Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} djpower V-4. djpower V-4 17 pagina's. Super spark machine

Pagina afdrukken
Display
Manual Spark
Spark ON
>>>>> Temp. 580
Spark Height
DMX
DMX Address
Configurat
ion Page
Remaining Time
Device Error
Status
Pages
Time is Up
5.4
DMX Mode & Operation
The Super Spark Machine V-4 works with a DMX controller.
•
Connect the product to a suitable power outlet.
•
Turn the product on.
•
Connect a DMX cable from the DMX output of the DMX controller to the DMX input socket on the
product.
5.4.1
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels. If you choose a
starting address that is too high, you could restrict the access to some of the product's channels.
Description
Press " ▲ " or " ▼ " to trigger spark output
OFF
manually
The machine is outputting spark.
The LCD will automatically switch to this page
after Manual Spark is on for 5 seconds.
Press any button, the LCD will go back to
previous page "Manual Spark ON", and press
"▲"or"▼"again to switch OFF Manual Spark.
The longest duration of single time of Manual Spark output is 30 seconds
when machine works properly. The machine will automatically stop after 30
seconds continuous output with LCD showing "Manual Spark OFF". For
longer output, just turn on Manual Spark again.
Press " ▲ " or " ▼ " to set the Spark height of
Manual Spark from level 1 (minimum) to 10
10
(maximum).
Press " ▲ " or " ▼ " to set the DMX starting
512
address
Check remaining run-time
25 Min 00 Sec
Errors
E0
Different codes "E#" represent different errors.
Refer to "General Troubleshooting" chapter to for a brief description of each
error code.
There's no remaining run-time for machine to
continue output when this page shows.
E5
Swipe a new card to top up run-time.
Refer to "Identify & Activate Spark Seed" chapter to for more information.
happen
when this
- 8 -
Parameter
Range
ON/OFF
1 - 10
1-512
page
shows.