djpower DFZ-800 Handmatig - Pagina 5

Blader online of download pdf Handmatig voor {categorie_naam} djpower DFZ-800. djpower DFZ-800 12 pagina's. Fazer

Pagina afdrukken

3. Control

3.1. Installation

•
Take out the unit from the shipping package; make sure all the foams and plastic padding are
removed, especially in the nozzle areas.
•
Place the unit on a flat surface and remove the tank cap.
•
Fill the tank with high-quality, water-based fog liquid recommended by the distributor. Any
other types of liquids may cause spraying water or serious clogging problem. After infusing
liquid, seal the tank with cap. Be careful that the liquid doesn't exceed the maximum level. Do
NOT OVERFILL.
•
Close the Tank and assure yourself, that no liquids came inside the Machine. If you feel
uncomfortable it is also possible to take the tank out of the machine before filling it up. Liquids
inside the machine can cause short circuits and could cause danger for your own safety.

3.2. Starting up the machine

•
Connect the Power Cord (delivered with the machine) to a Power Supply according to the
technical Data of the device. Please make sure the device is sufficiently grounded.
•
Turn on the machine with the Power switch on the back.
•
The switch will light up red when the machine is on Power.

3.3. Explanation of menu and display

You will find 4 buttons on the machine:
MENU :
Press the button to scroll through the menu.
UP/TIMER:
Press the button to increase the value or to activate the timer function.
DOWN/VOLUME:
Press the button to decrease the value or to activate the volume function.
ENTER/STOP:
Press this button to get to menu 1. If the device works you will stop the
machine.
Important! If the language should be set to Chinese, you get from the pictures in the next chapters
how to get to the menu item "Language" and can set the language to English there.

3.3.1. Ready to snow

The machine is ready for use.

3.3.2. Interval

•
Press MENU until the display shows "Interval Set"
•
Use the UP / DOWN keys to set a Interval between 5 – 200 seconds
This setup is required if you want to use the Timer function.
5 / 12