Artison P-LCR/UMB Installatiehandleiding - Pagina 12
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Artison P-LCR/UMB. Artison P-LCR/UMB 18 pagina's. Speakers for video monitors and plasma panels
Pagina afdrukkenFINE TUNING YOUR LCRS
Crossover Setting:
The DOLBY HIGH PASS SETTING in most receivers is 80Hz when set in the SMALL SPEAKER
position. We have optimized the S-LCR, P-LCR, and M-LCR speakers for this setting.
Adjusting the Settings on the LCR Speakers
Stage Tweeter Settings:
The switch turns the tweeter on and off. In most installations, the Stage Tweeter should be left on.
Turning on the Stage Tweeter widens the Left/Right Channels sound stage. Since it is difficult to
see the markings when the system is installed, you can tell that the switch is in the ON position by
feel. When the switch is set towards the outside of the system (away from the display) it is in the
ON position.
Presence Control Settings:
The Presence Control changes the DualMono Center Channel tweeter level to compensate for
differing room acoustics. This can be adjusted with the three-position switch located in the Center
Channel terminal cups. NOTE: Presence Control switches on both speakers should
be
set
to the same positions for proper balance of the center image.
- Normal - The toggle is set towards the outside of the system, away from the display. Start with
the switches in this position first.
- Decreased - The toggle is in the center position. This setting is for acoustically "hard", highly
reflective rooms.
-Increased - The toggle is set towards the display. This setting is for acoustically "soft", highly
absorbent rooms.
Adjustable Tweeters:
The M-LCR is equipped with adjustable front firing tweeters. Using the angle built into the woofers
as a reference, fine tune your LCRs to fit your application. The DualMono Center Channels
should be focused to the center of your listening area. Conversely the Left and Right Channel
Tweeters should be aimed to the Left and Right sides of your listening area.
12