Artison RCC300-SA Installatiehandleiding - Pagina 11

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Artison RCC300-SA. Artison RCC300-SA 15 pagina's.

IR FEEDTHRU

1. Connect a ⅛" Stereo MINIJACK to control the RCC600-SA via your integrated control

system.

2. Both the IR Feedthru Jack and the Front Panel IR receiver are designed to allow the User

functions to be programmed into an external remote. The Hexadecimal codes for the

amplifier are located on the web at:

POWER MODES

1. Select either:

ON – Always On.

AUTO – On with Signal Sense, without signal it will stay on for ≈15 minutes.

TRIGGER – On with a 12 Volt trigger.

2. +12V Trigger Input – Use the Green Phoenix Connector to connect a 12 volt trigger wire

from your other equipment, the polarity on the connector can be either way.

http://www.artisonusa.com