DK-TEC SAVCDH Gebruikershandleiding - Pagina 13

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DK-TEC SAVCDH. DK-TEC SAVCDH 15 pagina's. Flail mower

General maintenance

Carry out maintenance on the machine when it is disconnected from the tractor and placed on a

level

surface.

For any maintenance work, adjustment and cleaning must be carried out with the machine

standing on the ground, with the tractor's engine switched off, the power disconnected, the

handbrake pulled and the ignition key removed from the start panel.

The belt tension is checked every 4 hours of work. You must always be aware of its voltage.

WARNING

Perform maintenance only when the tractor engine is turned off and the power is removed, the

ignition key is removed and wait until all parts have come to a complete stop.

Adjusting the straps

Loosen screws A and B that block the support shaft and loosen the coin nut C Loosen the screws

that lock the gearbox on the support shaft D

Every 4 hours of work:

•

Check the condition of the nuts

•

Lubricate with lithium oil when indicated by the GREASE symbol

After 50 hours of work:

•

Select the correct amount of oil in the transmission and fill to level using oil type SAE 90 EP

API GL4

Every 100 hours of work:

•

Select the correct amount of oil in the transmission and fill to level