DK2 Everest R-3 Gebruiksaanwijzing - Pagina 8

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} DK2 Everest R-3. DK2 Everest R-3 16 pagina's. Snow plow

INSTALLATION STEPS

Pre-Installa on

The Installa on should be completed on an asphalt/concrete surface, with su

package your new FRISTTRAX Snowplow, discard all shipping materials, recycle if possible. Once the plow is

un-packaged, slowly roll the plow from its upright shipping con gu

the oil reservoir to

is now ready to be installed.

Ins

Step 1

– Install moun ng brackets and cross bar.

Please follow the instruc ons included in your mount kit. Fit in place with all fasteners ( nger ght) then

proceed to ghten with appropriate tools.

Step 2

– Install the main power cord.

**ALWAYS EXERCISE CAUTION WHEN USING HAND TOOLS AROUND THE BATTERY! A SOLID

CONDUCTER SUCH AS A METAL WRENCH CAN CAUSE SEVERE INJURY, FIRE, OR EVEN CAUSE THE

BATTERY TO EXPLODE!

A ach the short lead on the breaker to the posi ve "+" terminal of the ba ery. Secure the breaker to the

fender or

ewall with the use of screws or zip es in a place where it will not come into contact with the

e terminal. A ach the nega ve lead to the neg ve "-"ba ery terminal. Route the wires from the

ba ery in the best possible way to the front of the vehicle avoiding areas that can become hot or cause

fri on when the vehicle is in use. Zip e the wires to the vehicle's structure so that they do not move or

shi when in opera on. Con rm the breaker is in the closed posi on, and then close the hood slowly to

make sure yet again that the wires are clear from pinch points.

En.8

DK2 Everest R-3 man.

ine indicated with the 1L of hydraulic oil provided. Your new FIRSTTRAX Snowplow

ient area to work. Un-

on over onto the built-in cart. Top up