Artist Guitars BAH200 Handmatig - Pagina 6

Blader online of download pdf Handmatig voor {categorie_naam} Artist Guitars BAH200. Artist Guitars BAH200 12 pagina's.

BAH200

FRONT PANEL

1. Input

This is where you plug in your bass.

2. Mute Button

This button silences the amp, allowing you to safely plug in, and unplug

the bass without any loud pops or audio distortion. The light above

shines red when the amp is muted.

3. Passive/Active Switch

To change the attenuation of the input whether you are using a passive

or an active bass guitar.

4. Gain

This controls the preamp gain on the amp. As the knob is turned clock-

wise towards 10, the gain increases, giving some drive. The red clip

light on the top will indicate when the preamp is being driven to the

point of audio clipping, and the amp will begin to distort.

5. Bass EQ Control

This knob controls the amount of low-end frequency in your bass tone.

As it's turned clockwise towards 10, the amount of bass in the bass tone

will increase. If it's set at 0, there will be less bass.