Artist Guitars LP DIY KIT Handmatig - Pagina 8

Blader online of download pdf Handmatig voor {categorie_naam} Artist Guitars LP DIY KIT. Artist Guitars LP DIY KIT 16 pagina's.

LP DIY KIT MANUAL

WIRING

Wiring is implemented as plug-in modules, soldering is not required.

First take out the cables that are to be connected connected to the

potentiometers. Put the end with the three connectors into the channel from

the control cavity side until they reach the switch cavity.

Then put the potentiometers on the right positions as shown in the following

picture. The Tone and Volume potentiometers on the downside should be

connected to the neck pickup. The Tone and Volume potentiometer on the

upper side should be connected to the bridge pickup.