Artistic Licence daliGate quad Gebruikershandleiding - Pagina 9
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Artistic Licence daliGate quad. Artistic Licence daliGate quad 13 pagina's.
Pagina afdrukken
LED indication
daliGate quad features various LED indicators, which give different informational signals
depending on whether the product is booting up or in operational mode. The meanings are
explained below.
During boot-up
Power LED
y
- Slow flashing green (1Hz) = booting normally
- Slow alternating green/red (1Hz) = factory start (settings cleared)
During operation
Power LED
y
- Static green = powered, normal operation
- Fast flashing green (5Hz) =
- Occulting green = remote programming command received
- Static red = fault condition
- Fast alternating green/red (5Hz) = product is not commissioned (return for service)
Net & Link LED
y
- Yellow = network link established (but
no lighting data)
- Green = Art-Net or sACN detected
Net & Link LED:
OFF = Not connected
Yellow = Connected but no lighting data
Green = Art-Net / sACN on network
Power LED:
OFF = Not connected
Green (solid) = Good power
Green (flashing) =
Red = Fault condition
**The Power LED will flash continuously
when the Identify command is sent by
DMX-Workshop. This enables daliGate
quad to be easily distinguished on a
network containing multiple nodes.
This LED will also blip briefly in response
to any programming command received
via the network.
daliGate quad User Guide
identify**
Identify**
LEDs 1, 2, 3 & 4
y
- Green = Data activity
All indicators
y
- Off = mute command received
DALI LEDs:
OFF = No data is being sent to this port
Green = Lighting data is being output on this port
Page 9