Altusen ALTUSEN KH1516 Brochure & specificaties - Pagina 2

Blader online of download pdf Brochure & specificaties voor {categorie_naam} Altusen ALTUSEN KH1516. Altusen ALTUSEN KH1516 2 pagina's. Cat 5 high-density kvm switch
Ook voor Altusen ALTUSEN KH1516: Snel aan de slag (2 pagina's), Specificaties (8 pagina's)

Pagina afdrukken

Hardware Installation 2

Single Station Installation

1. Plug your Local Console's keyboard, monitor, and mouse into the unit's Console Ports.

Each port is color coded and marked with an appropriate icon to identify itself.

2. Use Cat. 5e/6 cable to connect any available KVM port to a KVM Adapter Cable that is

appropriate for the computer you are installing.

Note: : The KH1508 / KH1516 does not support distances between itself and the KVM

Adapter Cable that exceed 40 m.

3. Connect the KVM Adapter Cable to the computer. Plug the connectors on the KVM Adapter

Cable into the appropriate ports of the computer you are installing.

4. Plug the female end of the power cord into the KH1508 / KH1516's Power Socket; plug the

male end into an AC power source.

5. Turn on the power to the KH1508 / KH1516.

After the KH1508 / KH1516 is powered up, you can turn on the computers.

Operation 1

Port Selection

KH1508 / KH1516 installations provide three methods to obtain instant access to any

computer in your installation: Manual, OSD, and Hotkey.

Hot Plugging

The KH1508 / KH1516 supports hot plugging – components can be removed and added back

into the installation by unplugging and replugging their cables from the ports without the

need to shut the unit down.

Powering Off and Restarting

If it becomes necessary to power off one of the KH1508 / KH1516 units, please shut down

all the computers that are attached to it. And wait 10 seconds then power it back on. After the

station(s) is (are) up, power the computers back on.

Port ID Numbering

Each computer on the installation is assigned a unique Port ID. The Port ID is a one or two

segment number that is determined by the Stage Level and KVM Port number of the KVM

switch that the computer is connected to.

Operation 2

OSD Operation

1. To invoke the OSD Main Menu, tap the [Scroll Lock] key twice.

2. The OSD incorporates a two level (Administrator / User) password system. If this is the

first time that the OSD is being run, or if the password function has not been set, simply

press [Enter].

3. The OSD Main Screen comes up in Administrator Mode. In this mode, you have

administrator privileges, with access to all Administrator and User functions, and can set

up operations, as you would like.

When you invoke the OSD, a screen similar to the one below appears:

4. OSD Port Selection --To bring the KVM focus to a port, Double Click it, or move the

Highlight Bar to it then press [Enter].

Operation 3

Hotkey Operation

To invoke Hotkey Setting Mode (HSM), do the following:

1. Press and hold down the [Num Lock] key

2. Press and release the Minus [-] key

3. Release the [Num Lock] key

Hotkey summary table:

After invoking Hotkey Setting Mode, key in one of the following keys to perform the

corresponding function:

Key

Function

[Port ID] [Enter] Switches access to the computer that corresponds to that Port ID.

[T] [n] [Enter]

Sets the Auto Scan interval to n seconds - where n is a number from 1 - 255.

[A]

Invokes Auto Scan Mode.

[←] or [→] or

Invokes Skip Mode and Switches computer access depending on

[↑] or [↓]

which Arrow was pressed.

[B]

Toggles the Beeper On or Off.

Specifications

Function

KH1508

Computer

Direct

Connections

Max.

256 (via Daisy Chain)

Port Selection

OSD; Hotkey; Pushbutton

Keyboard 1 x 6-pin Mini-DIN Female (Purple)

Console Ports

Video

1 x HDB-15 Female (Blue)

Mouse

1 x 6-pin Mini-DIN Female (Green)

KVM Ports

8 x RJ-45 Female

Connectors

Daisy Chain

1 x DB-25 Female (Black)

Ports

Out

1 x DB-25 Male (Black)

F/W Upgrade

1 x RJ-11 Female (Black)

Power

1 x 3-prong AC Socket

Port Selection

8 x Pushbutton

Reset

1 x Semi-recessed pushbutton

Switches

F/W Upgrade

1 x Slide

Power

1 x Rocker

On Line

8 (Green)

Selected

8 (Orange)

LEDs

Power

1 (Blue)

Station ID

2 x 7-segment (Orange)

Emulation

Keyboard / Mouse

PS/2;USB(PC,Mac,Sun);Serial

Video

1600 x 1200 @60Hz (30m); 1280 x 1024@60Hz (40m)

Scan Interval

1–255 Seconds

I/P Rating

100–240VAC; 50/60 Hz; 1A

Power Consumption

120V/15.5W; 230V/15.5W 120V/15.7W; 230V/15.7W

Operating Temp.

0–40°C

Environment

Storage Temp.

-20–60°C

Humidity

0–80% RH, Non-condensing

Housing

Metal

Physical Properties

Weight

2.75 Kg

Dimensions

43.72 x 16.10 x 4.40 cm (19"/1U)

All specifications are subject to change without notice.

KH1516

512 (via Daisy Chain)

16 x RJ-45 Female

16 x Pushbutton

16 (Green)

16 (Orange)