Artistic License nanoScope Snelstarthandleiding - Pagina 2

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Artistic License nanoScope. Artistic License nanoScope 2 pagina's.

Analysis mode detail and hints chart

A brief explanation of each colour code is given below. For more detail on how to interpret the

signals and fix problems, please refer to the full user guide.

y Orange: Break Length out of range, less than 88 µS (an error)

y Magenta: Mark After Break (MaB) time less than 8 µS (an error)

y Yellow: Framing error (but can occur legitimately during RDM discovery)

y Red: RDM data format wrong (an error)

y Pink: Packet too long, contains more than 512 channels (an error)

y Cyan: Less than 512 channels in data (informational)

y Warm white: Non-zero start codes (excluding RDM) detected (usually informational but can

be an error)

y Green: RDM detected in data (informational)

y Mint: RDM draft detected in data (informational)

y UV blue: RDM responses detected (infomational)

y Ice blue: DMX test packets detected (informational)

www.ArtisticLicence.com

The Mould Making Workshop, Soby Mews, Bovey Tracey, TQ13 9JG

Tel: +44 (0)20 8863 4515

Good DMX512 containing 512 data slots

Good DMX containing less than 512 data

slots

Good DMX containing 512 data slots with

Non-zero Start Code packets

Good DMX containing less than 512 data

slots with Non-zero Start Code packets

Good DMX with active and good RDM

communications

Good DMX with active and good RDM

communications including Draft packets

Good DMX512 with good network test

packets containing 512 data slots of 85

Bad network test packets. Either < 512

data slots or values not equal to 85

Controller is transmitting bad RDM data

and getting no response

RDM communication between controller

and responders contains errors

Most likely pin 2 & 3 swapped in the DMX

cable

Most likely pin 2 disconnected in the DMX

cable