Artistic License DMX512 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Artistic License DMX512. Artistic License DMX512 8 pagina's. Rack-split rdm

Pagina afdrukken

Front

Two dual colour indicators are provided:

Panel

Indicators

Data:

Power:

DMX512

The DMX512 input is connected to the male 5 pin XLR on the

Input

left of the front panel. The female 5 pin XLR provides a

passive loop through such that multiple DMX512 receivers can

be connected to the same signal. When the Rack-Split RDM is

to be used at the end of a DMX512 cable, a termination

connector should be fitted to the loop through.

The DMX512 input is optically isolated from the outputs and

mains earth.

DMX512

The DMX512 outputs are provided on eight 5 pin XLR

Output

connectors. Each output is independently buffered.

Cable connection for both input and output is as follows:

Each output is capable of driving 32 DMX512 devices.

It is not necessary to terminate unused outputs.

Artistic Licence Engineering Ltd.

Green: Indicates that DMX512 data is flowing from



input to all outputs (normal operation).

Red: Indicates that RDM data received by the



outputs is being returned to the controller.

Red: Indicates good power and normal operation.



Flashing: Indicates that a connected RDM device is



jabbering (returning unwanted data continuously).

Return data from this output will be disconnected.

Pin 1

Protective ground

Pin 2

Data complement

Pin 3

Data true

Pin 4

Not used

Pin 5

Not used

Rack-Split RDM User Guide

Connect to cable screen

Connect to twisted pair wire

(N/A)