CustomWorks Rocket Stage-3 Gebruiksaanwijzing - Pagina 12

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} CustomWorks Rocket Stage-3. CustomWorks Rocket Stage-3 14 pagina's.

Rear Toe Stagger: Difference in the amount of Rear Toe-In among the rear tires. Typically used

only on high bite tracks with MORE toe-in on the Left Rear tire than the Right so the rear of the car

helps turn the car LEFT under acceleration.

Wheelbase (Front End): Wheelbase is the distance between the front and rear axles. Running

the entire front end assembly in the forward position makes the wheelbase longer and therefore

more stable on long/fast tracks with flowing turns. Running the entire front end assembly in the rear

position make the wheelbase shorter and therefore more suitable for short-tracks where you are

constantly turning.

Wheelbase (Rear End): This adjustment uses the plastic spacers on the kingpin the rear bearing

carrier rides on. With the spacers in front of the carrier it will lengthen the wheelbase but will

increase steering. If the spacers are behind the carrier it will shorten the wheelbase but increase

rear traction. This is completely backwards from how it works for the Front End only because in

the rear of the car you have the weight of the motor and the torque it creates. Shortening the

wheelbase here makes more of the car hang over the rear tires and promotes more weight transfer.

Final Drive Chart: The chart provided below gives you the final drive of the motor to spin the axle

1 revolution. This chart is NOT just the pinion and spur, but has the transmission ratio included as

well.

- To determine the final drive in your car:

1) Divide the Spur Gear by the Pinion Gear, which

equals a "Ratio".

2) Multiply the "Ratio" by the "Transmission Ratio"

which will equal your "Final Drive".

***Transmission Ratio = 2.4 for this car.***

- Gearing choice can vary greatly depending

on track size, surface type, amount of traction,

you motor and driving style. For starters consult

your local hobby dealer or fellow racer at your

local track for the ideal gear choice for your

application.