Alu-Cab EXPEDITION TENT Gebruiks- en onderhoudsinstructies

Blader online of download pdf Gebruiks- en onderhoudsinstructies voor {categorie_naam} Alu-Cab EXPEDITION TENT. Alu-Cab EXPEDITION TENT 4 pagina's.

Pagina afdrukken

Step 1 :

If there's a strong wind

blowing, park your vehicle with the

nose facing into the wind.

Step 2 :

Undo the two securing

catches and lift the lid.

Step 7 :

Place pole into lower tube

and then hook onto canvas eyelet.

Step 8 :

Remove ladder from bag.

WWW.ALU-CAB.COM

Step 3 :

After you've lifted the lid a

little, the gas struts will kick into

action and open the tent fully.

Step 4 :

Pull the compression elastic

down and secure by positioning

around the base of the tent canvas.

Step 9 :

Slot ladder onto catch and

secure. Note, additional ladder

brackets can be speciﬁed (or

ordered) and installed on the sides

for side entry.

Step 10 :

Place pole bag into ladder

bag, and store in secure place.

Step 12 :

To connect power, you will ﬁnd the power lead inside the shoe pocket

of your tent. Connect the Anderson plug into the supplied socket on the bottom

right hand side of the tent. Insert the 12V power plug into the closest

convenient power source.

EXPEDITION TENT

Step 5 :

Remove ladder bag and pole

bag from inside the tent.

Step 6 :

Remove poles from inside the

bag.

Step 11 :

The light switch is located

on the side of the frame (RHS).

Move the mattress slighly and you

will notice the switch together with

the USB ports.

Enquiries:

[email protected]

Tel: +27 21 703 3028

V 06_16

page 1