Alula RE210P Snelstarthandleiding - Pagina 2

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Alula RE210P. Alula RE210P 4 pagina's. Indoor motion sensor-pet immune honeywell compatible

Pagina afdrukken

Pro Tips

Walk test mode is entered by pressing the motion

sensor's tamper button. The walk test lasts three

minutes.

Walk Test Operation

• The walk test LED turns on when motion

is sensed.

• The motion sensor performs a

re-calibration after each activation. The

re-calibration takes about 30 seconds.

The sensor will NOT sense motion

during the re-calibration.

• Wireless transmissions are sent for each

detection, so walk test mode can also

be used to test the panel.

3M VHB tape works great if the surface is properly

prepared and firm pressure is applied for over 10

seconds.

Surface Preparation

• Clean the surface

• Ensure the mounting surface

temperature is above 50 °F

Motion lockout is active for three minutes after a motion event is detected. During the

motion lockout period, motion events will be ignored.

Motion sensitivity can be adjusted by the sensitivity jumper on the circuit board.

• Jumper Installed (lower sensitivity): Detects person in 3 to 5 steps.

Increases pet immunity. Usually for security applications.

• Jumper NOT Installed (higher sensitivity): Detects person in 2 to 4 steps.

Usually for occupancy applications.

Pet immunity is optimized when the motion sensor is mounted at 7.5 to 9.5 feet high

and aimed away from house features that could allow pets to be high in the detection

field (e.g. stairs, counter tops, tall furniture).

7.5ft

3.2ft

Motion catch performance is best when the motion sensor is positioned so a person

would typically walk across the front of the motion sensor instead of directly toward

the motion sensor.

Motion Detection Tips

• Provide a clear line-of-sight to the monitored area and remember that glass

blocks infrared energy.

• Aim away from windows and sunlight.

• Aim away from air conditioners, heaters or heating/cooling vents.

10ft

Cover Tamper Switch

Bug Foam IR Sensing Element

Low - Jumper ON

High - Jumper OFF

20ft

Walk Test LED

Sensitivity

Battery

External Contact

30ft

40ft