Alula RE657WF Handmatig - Pagina 2

Blader online of download pdf Handmatig voor {categorie_naam} Alula RE657WF. Alula RE657WF 12 pagina's. Flat mount touchpad
Ook voor Alula RE657WF: Handmatig (12 pagina's)

Pagina afdrukken

3. Finish mounting the Touchpad. See Touchpad Mounting for detailed instructions.

4. Enroll the Touchpad by pressing the enroll button on the side of the panel until it beeps once

and pressing "Connect" on the Touchpad. Then select the desired panel on the Touchpad.

Note, the Touchpad will list all panels within range, not just the ones in enrollment mode.

The network "names" will include the last 4 digits of the MAC Address printed on the panel

label.

After selecting the desired panel, the Touchpad will progress through stages of discovery

and authentication. Upon success it will show the DISARMED screen. If the wrong panel was

selected, press the "Restart"button in the side menu.

Troubleshooting Steps if Enrollment Fails:

• Confirm the panel is disarmed and in wireless enrollment mode. A red light will flash

on the panel if in wireless enrollment mode.

• Check whether the panel is already full. The limit is four Touchpads. To confirm

number of Touchpads connected, log into your account.

• Tap the "Restart" button to try again.

5. Test the Touchpad by arming and disarming the panel from the Touchpad.

9EF8