Alula RE929R Snelstarthandleiding - Pagina 2

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Alula RE929R. Alula RE929R 4 pagina's. Lte expansion card

Reset the expansion card

factory default switch until the expansion card's

LEDs flash once (roughly 5 seconds). This is

normally never required.

Cellular LED Indicators

the state of the expansion card. The CS and

Platform LEDs are not used.

LED

Indication

ON and Flashing off once

Power

every second - Powered and

(Green)

running

Cellular

ON - Registered with the local

(Red)

cellular network

Note: If the cell LED displays two quick flashes

(then repeats every second), this indicates it was

not able to connect to the network. There could

be a delay before retrying the connection.

Signal Strength

signal bar LEDs.

Signal Bar Cellular Signal Strength

Bad (0 to 14)

Marginal (15 to 19)

Acceptable (20 to 24)

Good (25 to 30)

Best (30+)

Troubleshooting Cellular Expansion Card Problems:

• Ensure antenna connectors are securely snapped into the circuit board

• Try repositioning the panel (move or rotate)

• Try moving the panel higher in the building

• Try moving the panel away from metal objects (appliances, ducts)

• Try moving the panel closer to a window

• Use a remote RE036 or RE046 antenna option (see below)

by pressing the

are used to show

can be determined using the

Factory Default Switch

Cellular LED Indicators

Signal Bar LEDs