Cutlass Fasteners LBS-075-T Handmatig - Pagina 7

Blader online of download pdf Handmatig voor {categorie_naam} Cutlass Fasteners LBS-075-T. Cutlass Fasteners LBS-075-T 19 pagina's.

Pagina afdrukken
CD STUD/BASE METAL COMBINATION WELDING CAPABILITIES

BASE MATERIAL

MILD STEEL
1006-1030
MEDIUM CARBON STEEL
1030-1050
GALVANIZED DUCT
STRUCTURAL STEEL
A-36, A-108
STAINLESS STEEL
405, 410, 430, AND 300 SERIES
EXCEPT 303
LEAD FREE BRASS,
ELECTROLYTIC COPPER,
LEAD FREE ROLLED COPPER
MOST ALUMINUM ALLOYS OF
THE 1100, 3000, 5000, AND 6000
SERIES
DIE-CAST ZINC ALLOYS
* Generally full strength results, depending upon the combination of stud size and base metal.
COPYRIGHT CFI 2009
Cutlass Fasteners, Inc.
83 Vermont Ave., Unit 6, Warwick, RI 02888
Tel: (401) 732-6333 Fax: (401) 732-6336
cutlass-studwelding.com
CLASSIC+ CD MANUAL
MILD STEEL
1008-1010
Excellent
Good*
Excellent
Excellent
Excellent
Excellent
-------------
Good*
Welding studs with ignition tip can be positioned
exactly on center punch marks or scribed lines.
Since the welding process is started by the ignition
tip, marking must be performed carefully.
The weld cannot ignite on a center punch mark
which is too deep. Should the weld start the weld
strength may still be questionable.
Therefore make sure the depth of the center
punch mark does not exceed 0.012" (0.3mm).
email:
STUD MATERIAL
STAINLESS
ALUMINUM
302, 304, 305
1100, 5356, 6061
Excellent
-------------
Good*
-------------
Excellent
-------------
Excellent
-------------
Excellent
-------------
Excellent
-------------
-------------
Excellent
Good*
Excellent
Stud Welding...
Fasteners
Equipment
Service
BRASS
70/30, 65/35
Excellent
Good*
Excellent
Excellent
Excellent
Excellent
-------------
Good*
PAGE
7
-
-