Aluprof AC151-06 Handleiding voor programmering - Pagina 3
Blader online of download pdf Handleiding voor programmering voor {categorie_naam} Aluprof AC151-06. Aluprof AC151-06 4 pagina's.
Pagina afdrukken5. SETTING OF THE AUTOMATIC CONTROL TIME
Press and hold "SET"
button for 3 seconds. The time
icon will flash.
By pressing the "LEFT" or
"RIGHT" buttons, settings of the
week days can by change.
By pressing the „UP" or „DOWN"
buttons, settings of the minutes can
by change.
Press the "LEFT" or "RIGHT"
button to select the
required channel.
We reserve the right to any technical change.
Valid on 2022.03.16
PROGRAMMING MANUAL OF THE AC151-06 TRANSMITTER
Press the "RIGHT" button.
The operating mode icon will flash.
Press the "STOP" button.
The lifting hour will be displayed.
Hour digits will flash.
Pressing the "STOP" button will switch
to settings of the lowering
hour.
Press the "UP" button to
activate the channel. Press the
"DOWN" button to deactivate the
channel.
Press the "UP" or "DOWN" buttons
to change the operating mode
to (T) automatic.
By pressing the „UP" or „DOWN"
buttons, you can change the hour
settings.
7, 8, 9
Repeat steps 7, 8, 9.
Press and hold "SET" button for 3
seconds till flashing of the icons on LCD
will stop, which means that the changes
to the settings have been saved.
Press "STOP" button. Week
day will flash.
Press "STOP" buttons.
Minutes digits will
flash.
Press the "STOP" button.
The channel digits
begin to flash.
3