Aluprof DC 318 Bedieningshandleiding - Pagina 4
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Aluprof DC 318. Aluprof DC 318 4 pagina's. I under plaster switch with radio receiver
Pagina afdrukken
6. CHANGING THE OPERATING MODE (PULSED / CONTINUOUS)
Press and hold simultaneously "UP" and "STOP" buttons with power
supply on.The indicator light is on.
Pulse mode enables, i.a. step control of venetian blind.
7. RESTORE FACTORY SETTINGS
Press and hold simultaneously "STOP" and "DOWN" buttons with
power supply on.The indicator light is on.
Production Plant in Opole;
ul. Gosławicka 3, 45-446 Opole, Poland,
4
tel. +48 77 40 00 000, fax +48 77 40 00 006
e–mail: [email protected]
OPERATING MANUAL FOR UNDER PLASTER SWITCH WITH RADIO RECEIVER DC 318
Headquarters; Production plant in Bielsko-Biała:
Warszawska 153, 43-300 Bielsko-Biała, Poland,
tel. +48 33 81 95 300, fax +48 33 82 20 512
After 6 seconds
indicator light flashes 3 times.
After 6 seconds
indicator light flashes 3 times.
The setting has been saved.
Factory settings restored
We reserve the right to any technical change.
Valid on 2022.04.04