Cutting SQ50E Snelstarthandleiding - Pagina 3

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Cutting SQ50E. Cutting SQ50E 7 pagina's. Pipe threading machine

caught in moving parts.

• Avoid accidental starting. Be sure switch is OFF before plugging in. Carrying tools with your

finger on the switch or plugging in tools that have the switch ON invites accidents

• Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard

hat, or hearing protection must be used for appropriate conditions.

Tool Use and Care

• Do not use tool if switch does not turn it ON or OFF. Any tool that cannot be controlled with

the switch is dangerous and must be repaired.

• Disconnect the plug from the power source before making any adjustments, changing

accessories, or storing the tool. Such preventive safety measures reduce the risk of starting

the tool accidentally.

• Store idle tools out of the reach of children and other untrained persons. Tools are

dangerous in the hands of untrained users.

• Check for misalignment or binding of moving parts, breakage of parts, and any other

condition that may affect the tool's operation. If damaged, have the tool serviced before using.

Many accidents are caused by poorly maintained tools.

• Use only accessories that are recommended for your tool. Accessories that may be suitable

for one tool may become hazardous when used on another tool.

• Keep handles dry and clean; free from oil and grease. Allows for better control of the tool.

Machine Safety

• Secure machine to bench or stand. Support long heavy pipe with pipe supports. This

practice will prevent tipping.

• Do not wear gloves or loose clothing when operating machine. Keep sleeves and jackets

buttoned. Do not reach across the machine or pipe. Clothing can be caught by the pipe or

machine resulting in entanglement and serious injury.

• Do not use this machine if the switch is broken.

• Keep hands away from rotating pipes and fittings. Stop the machine before wiping pipe

threads or screwing on fittings. Allow the machine to come to a complete stop before touching

the pipe or machine chucks. This practice will prevent entanglement and serious injury.

• Do not use this machine to make or break fittings. This practice is not an intended use of the

machine and can result in serious injury.

• Tighten chuck handwheel and engage rear centering device on the pipe before turning on

the machine. Prevents oscillation of the pipe.

• Keep covers in place. Do not operate the machine with covers removed. Exposure to

moving parts may result in entanglement and serious injury.

Description, Specifications

Description

The SQ50E threader is an electric motor-driven machine which centers and chucks pipe,