ARTRED AR-55 Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} ARTRED AR-55. ARTRED AR-55 11 pagina's. Scrubber-dryer

Pagina afdrukken

Reception of Machine

Machine Unpacking

1. Please carefully check whether there is damage on the

machine. If there is, please immediately reflect to the carrier.

2. Check the freight list, if there is any omission, please contact the distributor.

Freight content:

Two 12V batteries - standard configuration



One 24V battery charger - standard configuration



One water-absorbing adhesive tape - standard configuration



One scrubbing brush - standard configuration



Other accessories - additionally purchased



3. Before unpacking the machine, please dismantle the cargo fixed parts and

ropes fixing the machine on the warehouse. Carefully unload the machine from

the warehouse with the aid of the others.

Note: If no handling apron is used, please do not push the machine directly so

as to avoid machine damage.

Note: To avoid machine damage, please install the battery after unloading the

machine from the warehouse.

Battery Installation

Warning: fire or explosion hazard. The battery releases hydrogen. Please be

away from spark or open fire. The battery cover must be kept open when

charging.

For safety: Please wear protective gloves and eye protectors when treating the

battery and battery wiring when repairing the machine. Avoid contacting the

battery liquid acid.

1. Stop and place the machine on the level ground and take out the key.

2. Lift up the waste water tank to expose the touchable battery cabin.

3. Carefully install the battery in the battery cabin and connect the battery cable

according to the following figure

packing box of the

Blue

Red

Note: Please do not throw the battery into the battery cabin so as to avoid the

damage to the battery and the machine.

4. Before connecting the battery, please firstly ensure whether the electrodes

and electric terminals are clean. Use electrode cleaning fluid and wire brush as

required.

Explanation: Paint a thin layer of metal-free lubricating oil or protective spray

on the connected wiring to avoid battery corrosion.

5. After the battery is installed, please check the scale of thebattery

coulomb meter. Charge the battery as required.

Machine Cleaning Method

Cleaning method:

Manually control the water valve to adjust the volume of the cleaning liquid

(water and detergent) flowing to the ground. The brush cleans the floor with the

solution mixing detergent and water. While the machine advances, absorb the

waste water on the floor with squeegee into the waste water tank.

Information on Brush and Scouring Pad

To ensure the optimum efficiency, please use the correct type of brush for

cleaning. The brush and scouring pad suggested for use are as follows:

Soft nylon brush (white) -

It is suggested to clean the coated floor without damaging the floor. Clean

without scratches.

Polishing pad (white) -

It is used for maintaining highly smooth or polished floor.

Crash pad (red) -

It is used for scrubbing slight dirt without damaging the floor.

Gravity folding pad (black) -

It is used for powerfully removing the heavy coating or base or super-powerful

scrubbing.