Artrom YL-2010G Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Artrom YL-2010G. Artrom YL-2010G 10 pagina's.

Pagina afdrukken
Artrom YL-2010G Gebruikershandleiding

SAFETY INSTRUCTIONS

Install the device only when it complies with local regulations, by-laws and
standards. The unit is only suitable for use in dry locations, indoors. Check the
main voltage and frequency. The unit is only suitable for earthed sockets,
connection voltage 220-240V / 50 Hz.
GENERAL
To obtain optimum performance from your dehumidifier, do not place it near a
radiator or any other heat source.
Ensure that all windows are closed in order to achieve maximum efficiency.
The capacity of the dehumidifier depends on the temperature and the
humidity in the room. At lower temperatures, less moisture will be removed.
Ensure that the screen filter is kept clean. This prevents unnecessary power
consumption and guarantees optimum efficiency.
If the power supply has been interrupted, the dehumidifier will restart after
three minutes. The automatic delay protects the compressor.
IM
PORTANT
T
he device MUST always have an earthed connection. If the power
s
upply is not earthed, do not connect the unit. The plug must always be
easily accessible when the unit is connected. Read these instructions
carefully and follow the instructions.
A
TTENTION
Y
our dehumidifier must be standing upright for at least two hours
b
efore use.
Before connecting the unit, check the following:
The voltage supply must correspond with the mains voltage stated on the
rating label.
The socket and power supply must be suitable for the current stated on the
rating label.
The plug on the cable of the device must fit into the wall socket.
The device must be placed on a flat and stable surface.
The electricity supply to the device must be according to CE safety standards.
Nevertheless, you must take care, as with any other electrical device.
Do not cover the air inlet and outlet grill.
Empty the water reservoir before moving the unit.
Never allow the device to come into contact with chemicals.
Never spray the unit with or submerge in water.
Do not insert objects into the openings of the unit.
Always remove the plug from the electric power supply before cleaning or
replacing the unit or components of the unit.
Never use an extension cable to connect the device to the electric power
supply. If there is no suitable, earthed wall socket available, have one
installed by a recognized electrician.
4