Alutech CUL01 Aansluit- en bedieningshandleiding - Pagina 8

Blader online of download pdf Aansluit- en bedieningshandleiding voor {categorie_naam} Alutech CUL01. Alutech CUL01 16 pagina's.

PACKAGED ELECTRONIC CIRCUIT

Element

U10

U11

U12

REL1

REL2

LED1

J10

J11

J12

If security sensors are not plugged in (J10 and J11 adapters), jumpers must be installed

(pic. 2). If a security sensor is plugged in, remove the jumper.

Safety device T6.3А

ATTENTION: Use safety devices filled with glass sand!

Transformer

2А safety device

Relay

The LED which signals the valve's operational status.

It is on if power voltage is supplied to the valve

Jumper for selection of safety sensor type: PNP or NPN (transistor output)

Control button 2 adapter (pic. 1)

Network adapter (pic. 3)

Protection grounding adapter

Jumper adapter depending on the supply voltage.

If supply voltage is 400 V, the jumper must be installed as in pic. 2

Line circuit breaker 1 adapters (pic. 1, pic. 2).

The plug of 015 3P + N + E 16A / 6h type is used for network connection.

The socket must be of the same type for the plug using it

The adapter of a hydraulic unit valve (pic. 5) and sectional doors position

sensor (pic. 6). Security sensor supply voltage is 24 V DC. If the security sensor

has signaled (sectional doors are closed), the hydraulic unit electric motor

must be turned off and the platform must be blocked

The adapter of a hydraulic unit electric motor (pic. 4) and stop-motion

sensor (NC)

LED1 jumper. The LED will be on if the jumper is installed.

If the jumper is removed, the LED is off.

Description

CONNECTION AND OPERATIONAL MANUAL. CONTROL UNIT CUL01

Table 2. Circuit elements list