Alva GHP50 Handmatig - Pagina 15

Blader online of download pdf Handmatig voor {categorie_naam} Alva GHP50. Alva GHP50 18 pagina's. Wall mounted patio heater

Pagina afdrukken

CHANGING YOUR CYLINDER

Make sure your cylinder valve is closed (by turning it clockwise). Allow

the heater to cool completely before replacing the cylinder.

Replace the cylinder. ALWAYS check that the regulator sealing

washer (nose cone) is intact and in place before reattaching the

regulator to the gas cylinder. (Figure B, page 10)

Perform the leak test as detailed on page 10 every time you

replace the gas cylinder.

DO NOT attempt to remove the regulator while the heater is on or

if the cylinder valve is not closed.

Core

GOOD

BAD

Not enough air

BAD

Too much air

Fig. M

in need of replacing, use only original Alva parts. Using any

other spare parts is dangerous and will void the warranty.

When the heater is not going to be used for an extended

period of time, keep it covered or in its box, to prevent dust

from settling on the panels. When removing the heater from

storage, use a vacuum cleaner to vacuum the panels before

re-use.

MAINTENANCE

•

Always make sure the

heater is OFF and cool,

with the cylinder valve

closed, before conduct-

ing any maintenance.

•

Your heater should be

checked once a year

by a technician.

•

If faults are suspected or

detected, stop using the

heater and contact ALVA.

•

Clean the exterior of your

heater when required to

remove dust and prevent

lint build up.

•

DO NOT use abrasive

products to clean the

heater; these may

damage the paint work.

•

While in operation the

pilot flame should be

steady. If it flickers or is yel-

low the heater needs to be

serviced. (Fig. G)

If any part of the heater is

WARNING:

Never attempt to

remove the regulator

if the heater is on or

if the cylinder valve is

not properly closed.