AKO WW 100 Montage- en bedieningshandleiding - Pagina 5

Blader online of download pdf Montage- en bedieningshandleiding voor {categorie_naam} AKO WW 100. AKO WW 100 6 pagina's. Radiant panel heater

Faults and their possible causes

Fault

Cause

The

Rotary switch is set at 0.

appli-

Thermostat is set too low.

ance

The overheating protection is

does

activated.

not

Household fuse reacted.

warm

up.

The appliance is not plugged in. Plug the appliance in.

If you have tried all the above and the app. still does not work, please refer to your dealer or a service centre.

Remedy

Set rotary switch

to position 1 or 2.

Turn up the thermostat

Make sure that air can circulate around the appliance. The appli-

ance switches on again automatically when it has cooled down.

Examine household fuse and check that no other appliances are

overloading the same household fuse.