aion ANUBIS Handmatig - Pagina 6

Blader online of download pdf Handmatig voor {categorie_naam} aion ANUBIS. aion ANUBIS 9 pagina's.

aion ANUBIS Handmatig

DRILL TEMPLATE

Cut out this drill template, fold the edges and tape it to the enclosure. Before drilling, it's recommended
to first use a center punch for each of the holes to help guide the drill bit.
Ensure that this template is printed at 100% or "Actual Size". You can double-check this by measuring
the scale on the printed page.
Top jack layout assumes the use of closed-frame jacks like the
not fit in layouts with 5 or more knobs due to the placement of the DC jack.
LED hole drill size assumes the use of a
size accordingly if using something different, such as a 3mm bezel, a plastic bezel, or just a plain LED.
INCH
0
1
CM
0
1
2
ANUBIS SILICON FUZZ
5mm LED
bezel, available from several parts suppliers. Adjust
125B
0.625"
0.625"
ø3/8"
ø1/2"
OUT
DC
VOLUME
TONE
x: -0.775, y: +1.71
x: 0, y: +1.71
ø9/32"
ø9/32"
BIAS
x: -0.775, y: +0.41
ø9/32"
CENTER (0,0)
LED
FOOTSWITCH
x: -0.775, y: -1.20
x: 0, y: -1.20
ø5/16"
ø15/32"
Switchcraft
111X. Open-frame jacks will
ø3/8"
IN
GAIN
x: +0.775, y: +1.71
ø9/32"
BODY
x: +0.775, y: +0.41
ø9/32"
6