aion Flare Handmatig - Pagina 7

Blader online of download pdf Handmatig voor {categorie_naam} aion Flare. aion Flare 10 pagina's. Oscillation machine

aion Flare Handmatig

DRILL TEMPLATE

Cut out this drill template, fold the edges and tape it to the enclosure. Before drilling, it's recommended
to first use a center punch for each of the holes to help guide the drill bit.
Ensure that this template is printed at 100% or "Actual Size". You can double-check this by measuring
the scale on the printed page.
Top jack layout assumes the use of closed-frame jacks like the
not fit in layouts with 5 or more knobs due to the placement of the DC jack.
LED hole drill size assumes the use of a
size accordingly if using something different, such as a 3mm bezel, a plastic bezel, or just a plain LED.
INCH
0
1
CM
0
1
2
FLARE FUZZ MACHINE
5mm LED
bezel, available from several parts suppliers. Adjust
125B
0.625"
0.625"
ø3/8"
ø1/2"
OUT
DC
x: -0.775, y: +1.735
x: -0.65, y: +1.735
ø9/32"
ø9/32"
x: -0.775, y: +0.635
x: 0, y: +0.635
ø9/32"
ø9/32"
CENTER (0,0)
x: -0.388, y: -0.465
x: +0.388, y: -0.465
ø9/32"
ø9/32"
LED
FOOTSWITCH
x: -0.775, y: -1.775
x: 0, y: -1.775
ø5/16"
ø15/32"
Switchcraft
111X. Open-frame jacks will
ø3/8"
IN
x: +0.775, y: +1.735
ø9/32"
x: +0.775, y: +0.635
ø9/32"
7